How To: Controlling Live Unit Lights
Accessing the Main Unit Light
- Login to your LVT Command Center Account.
open_in_new Go to the article Logging into the LVT Command Center for more information on how to login.
- Locate the desired event associated with the unit you’d like to access the lights for, and click Expand. The Expanded Event View appears.
- Select the Live Stream tab. Three real-time feeds from your cameras populate.
- Click the Light button located below the center camera preview feed. The main unit light turns on. This unit light is similar to a lamp post.
touch_app Click the Light button a second time to turn the light off.
|
|
Accessing the Strobe and Flood Lights
build You can configure your unit with strobe and floodlights. If you have opted to enable these functions, locate and use them as follows:
- Login to your LVT Command Center Account and navigate to the Live Stream tab as described in the Accessing the Main Unit Light section of this article.
- Select Other Commands, located below the center camera preview feed.
- Select Flood Light or Strobe Light.
touch_app Click the [Light] a second time to turn the light off. You can also configure your Strobe Light to be on 24/7 or activated by an alert. |
|
Recommended Next Steps or Other Resources
© LiveView Technologies, LLC